Samsung VP-M2100B Setting Start-upMode, Setting the CAM : Setting the System, [OK], [W/T], [W/T], [W/T], <System, 5.[W/T], on the CAM, [POWER/MODE, [POWER/MODE, [OK] button

ENGLISH

Setting the CAM : Setting the System

Setting Start-up Mode

You can select the starting mode displayed when you turn the CAM on.

1. Move [POWER/MODE Selector] down to turn	2		System Settings	F / 720i	1.	[POWER/MODE	]
on the CAM.
◆ The Video Record screen appears.					◆	Video Record
2. Move [POWER/MODE Selector] down again to					2.	[POWER/MODE	]
select System Settings mode and press the					System Settings		[OK]
[OK] button.
◆ The system is automatically converted into the		00:00:00 / 00:43:41		STBY	◆	[OK]
selected mode in two seconds even when the	3	System Settings
[OK] button is not pressed.					◆	System Settings
				System

◆ The System Settings menu appears. Display

3.Move the [W/T] button to select <System> and press the [√] button.4.Move the [W/T] button to select <Start-up> and press the [√] button.5.Move the [W/T] button to set the desired

setting and press the [OK] button. 4

◆Video Mode: The CAM starts up in the Video Mode.◆Previous Mode: The CAM starts up in the mode you used last.

Date/Time

System

Memory

LanguageEnglish

Settings : System

	System
Auto Shut off	5 Minutes
Demonstration	Off
Start-up	Video Mode
File No.	Reset

3.	[W/T]	<System>
	[√]
4.	[W/T]	<Start-up>
	[√]

5.[W/T]

[OK]

◆Video Mode◆Previous Mode

Beep Sound On

Notes

✤ If you select [œ ] button in the menu, the previous menu appears.

5

Settings : System
	System	✤	[œ ]
Auto Shut off	5 Minutes

✤ After you finish setting, press the [Record/Stop] button to exit from the menu screen.

✤ Make sure that the start-up mode is set to the selected mode when turning on the CAM again.

Demonstration	Off
Start-up	Previous Mode	✤	[Record/Stop]	/
File No.	Reset
Beep Sound	On	✤

98