Advanced Shooting
EASY Mode (for Beginners)
31
ENGLISH
Even a beginner can easily make a recording using the EASYmode.
The EASYmode only operates in CAMERA mode.
1. Set the power switch to CAMERAmode.
2. By pressing the EASYbutton, all the functions of the camera will be set to
off and the recording settings will be set to the following basic mode.
Battery level, recording mode, counter, date/time,
DIS ( ) will be displayed as the camcorder starts to run.
The word EASY will appear in the Viewfinder at the same time.
However, the Date/Time will only be seen if it has been previously set.
(DIS ( ) will be displayed on VP-W97 only)
3. Press the START/STOPbutton to start recording.
Recording will begin using the basic automatic environment settings.
4. Pressing the EASYbutton again turns the EASY mode off.
The camera will return to the settings that were set prior to the
EASYmode being switched on.
Notes:
In the EASYmode, the MENU, MF, DSE, P.AE and BLC functions are not available.
If you want to use these functions, you must first switch the EASYmode off.
The EASYsettings will be stored in the camera (providing a good lithium battery has been installed).
STBY
X:XX:XX
EASY
31. JAN. 2004
00761D VP-W90 UK (20-43) 5/6/04 9:59 AM Page 31