Samsung VP W 97 Snap Shot (VP-W97 only)

45
ENGLISH
Advanced Shooting
Snap Shot (VP-W97 only)
✤ With the SNAPSHOT feature, your camcorder can function like a normal film camera, allowing you to take single still
pictures.
- The SNAPSHOT function only operates in the CAMERA mode.
1. Set the power switch to CAMERAmode.
2. Press the SNAPSHOT button when you have the picture
you wish to capture.
■At this time, be careful not to shake your camcorder
because the image will be indistinctly recorded.
3. Once the SNAPSHOT button has been pressed, your camcorder will
automatically return to STANDBYmode after approximately 6 seconds.
■You can check the remaining available SNAPSHOT space by
looking at the time displayed on the screen.
■To stop SNAPSHOT shooting, press the SNAP SHOT button
again.
Notes:
■If the camcorder is knocked or shaken while taking a SNAPSHOT, the image may be blurred.
■The SNAPSHOT is activated in recording.
■When the SNAPSHOT button is pressed in CAMERA mode with no tape installed, a still image will be
displayed in the viewfinder.
CAMERA
00761D VP-W90 UK (44-64) 5/6/04 9:59 AM Page 45