Samsung VR10M7020UW/TW, VR10M7030WG/ST, VR10M7020UW/ML manual ENGLISH-35

Symptom	Checklist
I have installed the
Samsung Connect app, but,	ffYou can use the product after connecting the wireless router and
the POWERbot fails to be	the POWERbot through Easy-Setup according to the procedure.
connected.
I fail to log into the Samsung	ffCheck your ID and password on the screen of the Samsung
account.	account.
There appears a message	ffYou may have failed temporarily due to the distance from the
saying there is a failure	wireless router or other obstacles. Please try again after a while.
during Easy-Setup.
The products do not work	ffTurn off the Samsung Connect app and then run it again, or
even though the smart	disconnect the smart phone from the wireless router and then
	connect it again. Or turn off the power supply of the POWERbot,
phone is normally connected
	turn it on, wait for a minute or longer, and then run the Samsung
to the POWERbot.
	Connect app again.
The functions of the	ffCheck if the Smart control blocking function of the POWERbot
Samsung Connect App do not	is set. (When the Smart control is locked, the Wi-Fi indicator is
work.	turned off.)
The Samsung Connect Robot
Vacuum App fails to get	ffCheck if the POWERbot is connected to the wireless router.
started.
POWERbot is not connected	ffCheck the setting status of the wireless router.
to Wi-Fi.
	ffCheck whether the floor is not even and then the POWERbot works
Intelligent power control	with its body a bit lifted up.
function works on a normal	ffCheck whether there are any foreign matters on the cliff sensor
floor.	which is at the bottom of the POWERbot.
	ffCheck whether the floor color is dark.
Intelligent power control	ffWhen the POWERbot cleans a carpet with short fibre and
function does not work.	bright color, it may recognize the carpet as a floor and then the
	Intelligent power control function may not work.
	ffWhen POWERbot cannot recognize the wall, the Edge clean master
	may not work.
Edge clean master function	––When an obstacle made of reflective material is in front of the
does not work.	wall
	––When the wall itself is made of reflective material
	––When the wall is a dark color
Edge clean master function	ffCheck whether small obstacles are arranged in a narrow space.
works though there is no wall	ffWhen the POWERbot recognizes the front obstacle as a wall, Edge
or corner.	clean master function may work.
The Edge clean master	ffWhen the degree of the angle of a corner which the POWERbot
function works though
	detects is large, the Edge clean master function may work without
the POWERbot has not
	approaching the wall or corner.
approached a wall or corner.

ENGLISH-35