Installation

8. Open the water tap and check if there are any leaks around the connection areas.

• If there are water leaks, repeat the steps above.

Installation

• If using a screw type of water tap, connect the water hose to the water tap as shown.

WARNING

Stop using the washing machine if there is a water leak, and contact a local Samsung service centre. Otherwise, this may cause electric shock.

CAUTION

Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high-pressure hose.

NOTE

After connecting the water hose to the adaptor, check if it is connected properly by pulling the water hose downwards.

Use a standard type of water tap. If the tap is square-shaped or too big, remove the spacer ring before inserting the tap into the adaptor.

16  English

WA5700JS(GOOD)-03517E-02_EN_160223.indd 16

 

 

2016-02-23 ￿￿ 4:41:31