![](/images/new-backgrounds/1282184/28218413x1.webp)
❚❚ Connecting the Power Cord
<WAM5500, WAM3500 Only>
1Connect the power cord of your speaker as shown. It will connect at an angle.
2 Push the power cord into the notch at the | SPK |
edge of the speaker bottom. This lets the |
|
speaker rest flat when you stand it up. |
|
<WAM1500 Only>
1Connect the adaptor’s input power cord to the adaptor.
2Connect the adaptor’s output power cord (with the round plug) to the DC 19V jack on the speaker.
3Push the power cord into the notch at the edge of the speaker bottom. This lets the speaker rest flat when you stand it up.
NOTE
99Make sure to rest the AC/DC Adapter flat on a table or the it is hanging with the AC cord input facing upwards, water Adapter and cause the Adapter to malfunction.
POWER
SERVICE2POWER
SPK |
|
|
|
| DC 19V | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
floor. If you place the AC/DC Adapter so that or other foreign substances could enter the
44
7