Samsung WB500 manual Self-timer / Right button, „ Selecting the self-timer, 036, Icon

Self-timer () / Right button

When the menu is displayed on the LCD monitor, pressing the Self-timer( ) / Right button makes the cursor shift to the right tab.

„Selecting the self-timer

When the menu is not displayed on the LCD monitor, the Self-timer() / Right button operates as the Self-timer() button. This function is used when the photographer would also like to be in the image.

zIf you operate the Self-timer( ) button during the self-timer

operation, the self-timer function is cancelled.

z Use a tripod to prevent the camera from shaking.

z In Movie Clip mode, only the 10SEC self-timer will work.

z When you select 2SEC self-timer with Àash, the delay

1.Select a Recording mode with the exception of Voice recording mode. (p.20)

2.Press the Self-timer() button until the desired mode indicator displays on the LCD monitor.

3.When you press the Shutter button, the picture will be taken after the speci¿ed time has elapsed.

1

<Selecting the 10 SEC self-timer>

(2 seconds) can be extended according to the Àash charging

status.

z When taking a picture using the self-timer, the self-timer lamp

works as follows :

	– For the ¿rst 7 seconds, the lamp blinks
10SEC self-timer	at 1 second intervals.
	– For the ¿nal 3 seconds, the lamp blinks
	quickly at 0.25-second intervals.
2SEC self-timer	For the ¿nal 2 seconds, the lamp blinks
	quickly at 0.25-second intervals.

Icon	Self-timer Mode	Description
	10SEC self-timer	Pressing the Shutter button will allow an interval
		of 10 seconds before the image is taken.
	2SEC self-timer	Pressing the Shutter button will allow an interval
		of 2 seconds before the image is taken.
		A picture will be taken after about 10 seconds
	Double self-timer	and 2 seconds later a second picture will be
		taken.
		The camera detects the subject’s movement
	Motion Timer	6 seconds after pressing the Shutter button,
		and the picture is taken when the movement is
		stopped.
		You can take a picture by remote control instead
	Remote	of using the shutter button of the camera.
		Remote control mode is maintained after
		recording. Press the power button to release
		the setting.

036