090

Anynet+(CEC) is an AV network system which controls all your

connected SAMSUNG AV devices when using the TV remote control

that supports Anynet+. When connected to the SAMSUNG HDTV,

you can operate the playback functions by using the camera or the

TV remote control. For more information about connecting the HDTV

by using the HDMI cable, see page 89.

In order to use the Anynet+(CEC) feature, the Anynet+ option
under the camera’s [Settings] menu must fi rst be activated.
(p.88)

How to use the Anynet+(CEC)

1. Connect the HDMI cable to the HDMI port of both the camera and
HDTV. (p.89)
2. TV turns on as soon as the power button is pressed on the camera.
3. If there is no picture after turning on the TV, press the source button on
the TV remote control to change to the HDMI mode.
- Depending on the TV, it might not change to the HDMI mode although
you press the source button.
4. Set the TV to Anynet+(CEC) mode. Direct conversion into Anynet+(CEC)
mode may be possible, depending on the model of the TV.
- Refer to the TV manual for further information on activating the
Anynet+(CEC) mode.
Anynet+(CEC)
5. Press the menu button on the remote control unit’s playback control
pad to display the playback menu on the TV screen.
The playback menu appearing on TV screen operates the same
function of the camera.
6. Select the desired playback function by using the remote control of the
TV or the camera.
To select the sub menus, move to the desired playback menu and then
press the Enter (OK) button.
For more detailed information of the remote control of the camera, see
page 68.
Only available when using the TV that supports Anynet+(CEC).
(Not available by using TV that supports Anynet)
For more detailed information of the HDTV connection, see the
user manual of HDTV.
Move
Exit
MENU
PLAYBACK
View
Rotate
Single
Off