Operations
Control panel
|
|
|
|
|
| 09 | |
|
| 02 |
|
|
|
| |
|
| 01 |
|
|
| 08 | |
|
|
|
|
|
| ||
|
| 03 | 04 | 05 | 06 | 07 | |
01 | Course Selector | Turn the dial to select a course. |
|
|
| ||
02 | Display | The display shows current course information and estimated time | |||||
remaining, or an information code when a problem occurs. | |||||||
|
| ||||||
03 | Temp. | Press to change the water temperature for the current course. | |||||
|
| Press to change the spinning speed for the current course. | |||||
•Rinse Hold (No indicator): The final rinse cycle is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin cycle.
04 | Spin | • | No Spin : The drum does not spin after the final drain cycle. | |
• | Spin Only : To run the Spin Only cycle, press Spin for 3 | |||
|
| |||
|
|
| seconds. When the cycle time and spinning speed appear, press | |
|
|
| Spin repeatedly until a desired spinning speed is selected. Then, | |
|
|
| press Start/Pause to start the cycle. The spinning time depends | |
|
|
| on the selected cycle. | |
|
|
| ||
05 | Dry Level | Press this button to select proper drying option. | ||
Delay End lets you set the end time of the current cycle. Based on your settings, the start time of the cycle will be determined
06 Delay End by the machine’s internal logic. For example, this setting is useful for programming your machine to finish a wash at the time you normally return home from work.
•Press to choose a preset unit of hours.
start you Before
English 31
|
| 2017/2/16 18:53:21 | |
|
| ||
|
|
|
|