Operations
Control panel
|
|
|
| 09 |
02 |
|
|
|
|
01 |
|
|
| 08 |
|
|
|
| |
03 | 04 | 05 | 06 | 07 |
01 | Course Selector | Turn the dial to select a course. | |
|
|
| |
02 | Display | The display shows current course information and estimated time | |
remaining, or an information code when a problem occurs. | |||
|
| ||
|
|
| |
03 | Temp. | Press to change the water temperature for the current course. | |
|
|
| |
|
| Press to change the spinning speed for the current course. |
•Rinse Hold (No indicator): The final rinse cycle is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin cycle.
04 | Spin | • | No Spin | : The drum does not spin after the final drain cycle. | |||
• | Spin Only | : To run the Spin Only cycle, press Spin for 3 | |||||
|
| ||||||
|
|
| seconds. When the cycle time and spinning speed appear, press | ||||
|
|
| Spin repeatedly until a desired spinning speed is selected. | ||||
|
|
| Then, press Start/Pause |
| to start the cycle. The spinning time | ||
|
|
|
| ||||
|
|
| depends on the selected cycle. | ||||
|
|
|
|
| |||
05 | Dry Level | Press this button to select proper drying option. | |||||
|
|
|
|
| |||
|
| Delay End lets you set the end time of the current cycle. Based | |||||
|
| on your settings, the start time of the cycle will be determined | |||||
06 | Delay End | by the machine’s internal logic. For example, this setting is useful | |||||
for programming your machine to finish a wash at the time you | |||||||
|
| ||||||
|
| normally return home from work. | |||||
•Press to choose a preset unit of hours.
Before you start
English 31
2018/3/8 9:36:29
