Features and Functions Guide
SAMSUNG
Bluetooth® Headset
WEP210
Important:
Be sure to first follow the Quick Start Guide on
the reverse side of this guide to complete initial setup
of your headset.
Turn the headset on/off
To turn the headset on,
Press and hold the
4 seconds until you see 4 blue flashes on the indicator light, then release.
You will hear a tone and see the indicator light flashes while the power is on
(see Meaning of the indicator light of this guide).
To turn the headset off,
Press and hold the
4 seconds until you see blue and red flashes on the indicator light, then release.
You will hear series of 2 tones and see the indicator light stops flashing.
Wear the headset
Wear the headset on your ear.
In general, you will get better performance when there are no obstructions (including parts of your body)
between the headset and the phone.
Use the loop
You can replace the original earpiece cover with the supplied loop earpiece cover. Depending on what ear you are going to wear the headset, simply adjust the loop accordingly.
LeftRight
Troubleshooting
My phone does not find my headset. Make sure the blue indicator light on your headset turns on when your phone is searching for devices.
My headsest worked before but now it is not working.
Make sure your phone is on and the Bluetooth feature is turned on in your phone.
If the Bluetooth feature has been turnned off or was turned on only temporarily, you may need to restart the Bluetooth feature.
If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again.
Headquarters:
1301 East Lookout Drive Suite 150 Richardson, TX 75082
Make calls
Make a voice activated call
If the phone’s voice recognition feature is on, you can make a voice activated call.
1 | Press and hold the |
| the |
2 |
|
End a call
Press the
Answer a call
When a call comes in, the headset sounds the ring tone and flashes the blue indicator twice. Press the
Use enhanced features
Enhanced features are available for phones that support the
• Reject a call |
When you receive a call, press and hold the |
button. |
Depending on your phone’s setting or type, you may only |
be able to mute the ringer or this feature may not be |
Meaning of the indicator light
Light | Tone | Status | |
Flashes in | Quick series | The headset is in Active mode. | |
blue every | of 2 tones. | • The headset has an active | |
8 seconds. | (Active mode | ||
call in progress. | |||
| starts.) | ||
| • You can talk up to 5 hours | ||
|
| ||
|
| 30 minutes.* |
Internet Address:
http://www.samsungmobileusa.com/ accessories
Customer Care Center:
Say the name of the person you wish to call. |
Depending on your phone, this feature may not be supported.
Redial the last number
Press the
button.
Do not hold the
Adjust the volume
supported. |
• Answer a second call |
When your phone notifies you of another incoming call while |
you are on a call, press and hold the |
answer the second call. |
You can switch between calls by pressing and holding it. |
Flashes in | Quick series |
blue every 3 | of 2 tones. |
seconds. | (Standby |
| mode starts.) |
The headset is in Standby mode.
•The headset is waiting for a call.
•The headset can be in Standby mode up to 70 hours.*
button, the phone dials the last dialled or received number.
Depending on your phone, how to redial the last number may vary.
Press [Volume Up] on the side of the headset to increase the volume level and press [Volume Down] to decrease the volume level.
Depending on your phone, this feature is not supported. |
• Place a call on hold |
While you are on a call, press and hold the |
button. To retrieve the call, press and hold the |
button again. Depending on your phone, this feature may not |
be supported. |
Flashes in | 5 tones every | The battery of the headset is low. |
red. | 20 seconds. | • There is less than 10% of |
|
| |
|
| battery power left. Recharge |
|
| the battery. |
*Depending on the phone type and usage, the actual time may vary.
