maintaining your washer
CLEANING THE DOOR SEAL/BELLOW
1.Open the washer door and remove any clothing or items from the washer.
2. Inspect the gray colored seal/bellow between the door opening and the basket for stained areas. Pull back the seal/bellow to inspect all areas under the seal/bellow and to check for foreign objects.
seal/bellow 
3.If stained areas are found, wipe down these areas of the seal/bellow, using the procedure that follows.
a)Mix a dilute solution, using ¾ cup (177 mL) of liquid chlorine bleach, and 1 gal. (3.8 L) of warm tap water.
b)Wipe the seal/bellow area with the dilute solution, using a damp cloth.
c)Let stand 5 minutes.
d)Wipe down area thoroughly with a dry cloth and let the washer interior air dry with door open.
IMPORTANT:
•Wear rubber gloves when cleaning for prolonged periods.
•Refer to the bleach manufacturer’s instructions for proper use.
STORING YOUR WASHER
Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare your Washer for storage as follows:
•Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your Washer through the cycle without a load.
•Turn the water faucets off and disconnect the inlet hoses.
•Unplug your Washer from the electrical outlet and leave your Washer door open to let air circulate inside the tumbler.
•If your Washer has been stored in
20_ Maintaining your washer
|
| ||
|
| ||
|
|
|
|