washing a load of laundry

With your new Samsung washing machine, the hardest part of doing laundry will be deciding which load to wash first.

WASHING FOR THE FIRST TIME

Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).

1.Press the Power button.

2.Add a little detergent to the detergent compartment in

the detergent drawer.

3.Turn on the water supply to the washing machine.

4. Press the Start/Pause button.

This will remove any water that might be left over in the machine from the manufacturer’s test run.

Compartment : Detergent for prewash, or starch.

Compartment : Detergent for the main wash, water softener, pre-soaking agent, bleach and stain removal product.

Compartment : Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX) of “A”)

BASIC INSTRUCTIONS

1.Load your laundry into the washing machine.

Do not overload the washing machine. To determine the load capacity for each type of WARNING laundry, refer to the chart on page 24.

• Make sure that laundry is not caught in the door, as this may cause a water leak.

Washing detergent may remain in the front rubber part of the washer after a wash cycle. Remove any remaining detergent, as they may cause a water leak.

Do not wash water-proofed items.

2.Close the door until it latches.

3.Turn the power on.

4.Add detergent and additives to the dispenser drawer.

5.Select the appropriate cycle and options for the load.

The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.

6.Press the Start/Pause button.

washing a load of laundry _17

02 WASHING A LOAD OF LAUNDRY

WF8804EPA-02552Q-01_EN.indd 17

2008-07-07 ¿ÀÈÄ 2:20:52

Page 17
Image 17
Samsung WF8804EPA/XEE, WF8704EPF/XEE manual Washing a load of laundry, Washing for the First Time, Basic Instructions