3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).

C

4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.

5. Turn part (C) in the arrow direction to tighten it.

C

6. While holding down part (D), connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound.

D

7. If you are using a screw type of water tap, use the provided screw-type adaptor to connect to the water tap as shown.

Installation

English  21 

Untitled-2 21

 

 

2017-06-26 ￿￿ 3:19:00