Samsung WW70K44205W/EE, WW70K4420YW/EE manual Operations, Control panel

Operations

Control panel

02 08

01

09

03 04 05 06 07

01	Cycle Selector	Turn the dial to select a cycle.
02	Display	The display shows current cycle information and estimated time
		remaining, or an information code when a problem occurs.
03	Temp.	Press to change the water temperature for the current cycle.
		Press to change the spinning speed for the current cycle. The
		revolutions per minute (RPM) differs with the model.
		•	Rinse Hold : The final rinse process is suspended so that
			the laundry remains in the water. To unload the laundry, run a
			drain or spin process.
04	Spin	•	No Spin : The drum does not rotate after the final drain
			process.

•Spin Only : To run the Spin Only cycle, press Spin for 3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed is selected. Then, press Start/Pause to start the cycle. The spinning time depends on the selected cycle.

	Press to select an option from Intensive, Pre Wash, and Rinse+.
05 Options	Press again to deselect.

•Availability of the options depends on the cycle.

		Delay End lets you set the end time of the current cycle. Based
		on your settings, the start time of the cycle will be determined
06	Delay End	by the machine’s internal logic. For example, this setting is useful
		for programming your machine to finish a wash at the time you
		normally return home from work.

•Press to choose a preset unit of hours.

Operations

English  31 

WW4500K-03734F-00_EN.indd 31

8/3/2016 5:31:33 PM