Operations
Control panel
02 |
|
|
| 10 |
|
|
|
| |
|
|
|
| 08 |
01 |
|
|
| 11 |
|
|
| 09 | |
|
|
|
| |
03 | 04 | 05 | 06 | 07 |
Operations
01 | Cycle Selector | Turn the dial to select a cycle. |
| |
|
|
| ||
02 | Display | The display shows current cycle information and estimated time | ||
remaining, or an information code when a problem occurs. | ||||
|
| |||
|
|
| ||
03 | Temp. | Press to change the water temperature for the current cycle. | ||
|
|
| ||
04 | Rinse | Press to change the rinse count for the current cycle. You can set | ||
the rinse count to a max of 5, depending on the cycle. | ||||
|
| |||
|
|
| ||
|
| Press to change the spinning speed for the current cycle. The | ||
|
| revolutions per minute (RPM) differs with the model. | ||
|
| • Rinse Hold : The final rinse process is suspended so that the | ||
|
| laundry remains in the water. To unload the laundry, run a | ||
|
| drain or spin process. |
| |
|
| - To use the Rinse Hold option, press | Spin repeatedly | |
|
| until all the Spin option indicators turn off. | ||
05 | Spin | • No Spin : The drum does not rotate after the final drain | ||
process. |
| |||
|
|
|
-To use the No Spin option, press Spin repeatedly until the option indicator ( ) turns on.
•Spin Only : To run the Spin Only cycle, press Spin for 3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed
is selected. Then, press Start/Pause to start the cycle. The spinning time depends on the selected cycle.
| Press to select an option from Intensive, and Pre Wash. Press |
06 Options | again to deselect. |
•Availability of the options depends on the cycle.
32 English
|
| ||
|
| ||
|
|
|
|