Press to change the spinning speed for the current cycle. The revolutions per minute (RPM) differs with the model.

Rinse Hold : The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.

05 Spin

• No Spin : The drum does not rotate after the final drain

process.

 

Spin Only : To run the Spin Only cycle, press Spin for 3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed is selected. Then, press Start/Pause to start the cycle. The spinning time depends on the selected cycle.

 

Press to select an option from Intensive, and Pre Wash. Press

06 Options

again to deselect.

 

• Availability of the options depends on the cycle.

 

 

07 Bubble Soak

Press to activate/deactivate the Bubble Soak function. This

function helps remove a wide variety of stubborn stains.

 

 

 

 

Delay End lets you set the end time of the current cycle. Based

 

on your settings, the start time of the cycle will be determined

08 Delay End

by the machine’s internal logic. For example, this setting is useful

for programming your machine to finish a wash at the time you

 

 

normally return home from work.

 

• Press to choose a preset unit of hours.

 

 

 

For lightly soiled garments of less than 2 kg that you want to

09 Quick Wash

wash quickly.

• Availability of this option depends on the cycle.

15’/30’

• The cycle time is subject to change, depending on the detergent

 

 

amount, water level, and contamination level of the load.

 

 

10 Power

Press to turn on/off the washing machine.

 

 

11 Start/Pause

Press to start or stop operation.

For more information on the options, see the “Special features” section. *(Hold 3 sec) : Press and hold for 3 seconds.

Operations

English  33 

Untitled-6 33

2017-12-12 ￿￿ 3:17:55

Page 33
Image 33
Samsung WW90K5410UW/EU, WW90K5410WW/LE, WW70K5410UW/LE, WW8SK5410UW/KJ, WW80K5410UW/EU, WW9SK5410UW/KJ manual English 33