Samsung WW90M760NOA/EE manual Operations, Control panel

Operations

Operations

Control panel

02
			11
08	10		09
			12
07
03	04	05	06

01	Cycle Selector	Turn the dial to select a cycle.
		The display shows current cycle information and estimated time
02	Display	remaining, or an information code when a problem occurs.
		For buttons and icons, refer to the corresponding page..

Press to change the water temperature for the current cycle.

03 Temp. Press and hold for 3 seconds to turn on/off the Drum Light.

The drum light turns off automatically after 2 minutes.

04	Rinse	Press to change the rinse count for the current cycle. You can set the
		rinse count to a max of 5, depending on the cycle.

Press to change the spinning speed for the current cycle. The revolutions per minute (RPM) differs with the model.

•Rinse Hold( ): The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.

-To use the Rinse Hold option, press Spin repeatedly until all rpm numeric indicators turn off. Not available for the DRAIN/

		SPIN cycle.
05	Spin	• No Spin( ): The drum does not rotate after the final drain
		process.

-To use the No Spin option, press Spin repeatedly until all rpm numeric indicators turn off. Only available for the DRAIN/ SPIN cycle.

•Spin Only: To run the Spin Only cycle, press Spin for 3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed is selected. Then, press and hold Start/Pause (Hold to Start) to start the cycle. The spinning time depends on the selected cycle.

32  English

WW90M760NOA_DC68-03889W_EN.indd 32

2018/2/9 15:02:01