1.Turn off your monitor and unplug its power cord.
2.Lay the LCD monitor
3.Remove four screws (
) and then remove the Stand from the LCD monitor.
Attaching a Base
This monitor accepts a 200 mm x 100 mm
Monitor
Mounting interface pad (Sold separately)
1.Turn off your monitor and unplug its power cord.
2.Lay the LCD monitor
3.Remove four screws and then remove the stand from the LCD monitor.
4.Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the
zDo not use screws longer than the standard dimension, as they may damage the inside of the Monitor.
zFor wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on their specifications.
zDo not use screws that do not comply with the VESA standard screw specifications. Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
zSamsung is not liable for product damage or personal injury when a
zTo mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from the wall surface.
zContact the nearest Samsung Service Center for more information. Samsung Electronics will not be responsible for damages caused by using a base other than those specified.
zPlease use Wall Mount according to the International standards.
Installation Using the Hood
What is the Hood?
It is a device that can be attached to the top, right and left of the monitor to screen sunlight, preventing any color distortion. You can change the colors of the entire screen according to your preferences.
