
Samsung Client/Mobile PCIe-based Solid State Drive (XP941)
Boost your next PC’s performance with a Samsung’s XP941
Achieve Maximum Performance
No need to RAID several SSDs, as Samsung’s XP941
The new Samsung XP941 enables a sequential read performance of 1,400MB/s (megabytes per second), which is the highest performance available with a PCIe 2.0 interface. This allows the drive to read 500GB of data or 100 HD movies as large as 5GB (gigabytes) in only six minutes, or 10 HD movies at 5GB in 36 seconds. That is approximately seven times faster than a hard disk drive (which would need over 40 minutes for the same task), and more than 2.5 times faster than the fastest SATA SSD.
Superior Quality and Reliability
Samsung’s
The XP941 comes in the new M.2 form factor (80mm x 22mm), weighing approximately six grams – about a ninth of the 54 grams of a
Samsung XP941 Series Technical Specificaitons
Form Factor | M.2 2280 | |
Capacity (GB) | 128, 256, 512 | |
Host Interface | ||
MTBF | 1.5 Million Hours | |
Uncorrectable Bit Error Rate (UBER) | < 1 sector per 1015 bits read | |
Power Consumption (Active/Idle) | 5.8W / 80mW | |
Peak Read Sequential Performance | Up to 1170 MB/s | |
Peak Write Sequential Performance | Up to 930 MB/s | |
Peak Random Performance | Reads: Up to 122K IOPS | |
Writes: Up to 72K IOPS | ||
| ||
Physical Dimesions | 22 x 80 x 4 mm | |
Weight | 8.5g |
For more information, visit:
For specific sales inquiries, contact us via email at: ssd@ssi.samsung.com
Copyright ©2014 The appearance of all products, dates, figures, diagrams and tables are subject to change at any time, without notice. Samsung Semiconductor, Inc. is a registered trademark of Samsung Electronics Co. Ltd. All other names and brands may be claimed as the property of others.
Samsung Electronics Co., Ltd.
Giheung Campus, 95, Samsung