Quick-35 2/26/04 11:39 AM Page 2

YP-35 Quick Guide

Location of Controls

Microphone

 

Earphone Jack

SRS Button

 

 

 

 

Neck strap Hook

 

Display

 

 

Play/Stop/Pause/

 

 

Forward/Backward Button

Hold Switch

 

 

 

MENU/Loop Repeating/

 

➡

Mode/Volume Button

 

USB Cable Connection Port

 

 

 

 

Battery Cover

 

Playing Music

When you press the button, the yepp logo appears and a music/voice file is played.

Stopping Music

When you press the button while playing, the music stops. If no buttons are pressed within 10 seconds (changes depending on settings), the yepp automatically powers off.

● You can also turn off the power by pressing and holding the button.

1

Connecting the USB cable

➤Before connecting yepp to PC, make sure to install USB driver.
1 Plug one end of the USB cable into the USB port on the PC.

2 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp.

● If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly.

● The yepp will automatically turn on.

 

 

connect USB

3 USB driver is installed with a message saying that

 

 

 

 

 

 

it is searching for a new device. You may not see

 

 

cable

the display screen during installation. Go to the

 

 

 

 

 

device manager to check that installation

 

 

 

has been successfully completed.

 

 

 

4 Upon installation of the USB driver

 

 

 

 

 

 

 

 

 

"SAMSUNG YP-35”will appear in the

 

 

 

[System Properties] ➝ [Device Manager].

 

 

 

2