USB connect cable
Connecting the yepp to a PC with a USB cable
4 Connect a USB cable to the USB port on the computer.
5 Connect the opposite end of the USB cable to the USB cable port on the right side of the yepp.
● If you disconnect the USB cable from your PC while implementing a command or initializing during
USB driver installation, your PC may not function correctly.
6 The USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation.
Go to the device manager to check that installation has been successfully completed.
Connecting the yepp to a PC
7 | Upon installation of the USB driver |
"SAMSUNG |
[System Properties] → [Device Manager].
16
How to check the USB driver
●Windows 98/ME:
Control Panel → System → Device Manager → Disk drives → SAMSUNG
●Windows 2000:
Control Panel → System → Hardware → Device Manager → Disk drives →
SAMSUNG YP-60 USB Device
●Windows XP:
Control Panel → System → Hardware → Device Manager → Disk drives →
SAMSUNG
8 When the USB driver is not installed automatically, refer to the next page.
17