![](/images/new-backgrounds/1155755/15575525x1.webp)
Recording Voice
✽To move to other modes from the Voice mode, refer to “Changing Mode”.
1 Press and hold the REC button to start voice recording.
2 Press the REC button again to stop the recording and save the voice file.
✍Note
-The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
-If the Memory is full, Voice Recording is stopped automatically.
-Voice Recording does not work in FM Mode or when the Line In cable is connected.
24
MP3 Encoding
✽To move to other modes from the LINE_ENC mode, refer to “Changing Mode”.
1 Connect the Audio Output port on the external audio source | ENG |
| |
(or the Line Out port) to the ENC port on the device with the Line cable. |
|
2 Press and hold the REC button to start MP3 encoding.
3 If the REC button is pressed during encoding, the encoding stops and an encoding file is created.
●The files are encoded in the order of L001, L002....
and saved as MP3 file in LINE_ENC folder after encoding.
✍Note
-Bit Rates can be set within the range of 32Kbps~128Kbps.
-Volume can be adjusted while monitoring the Encoding.
✍Notice
-Do not disconnect the Line cable during Encoding.
-If the battery is not charged enough, encoding will not be done.
-Adjust the volume of the external audio source to a suitable level and encode it. If the volume level is extremely high, the sound quality may not be good.
25