Manual Installation of the USB Driver

If the driver does not install automatically, follow the instructions below to install the USB driver manually.

I If an error occurs during installation of the USB driver

1 Check the device manager.

Windows 98SE:

Control Panel ➝ System ➝ Device Manager

2 Check to see if there is a device marked with an exclamation or question mark (displayed as unknown device or USB device).

3 Double-click a device marked with an exclamation or question mark.

4 Select the Driver tab and click [Update Driver].

✍Notice

- The installation method may vary depending on the type of PC or operating system. Contact your PC dealer or service center for installation information.

-If errors occur continuously when you install

the USB driver, reconnect the USB cable after rebooting your system.

16