DNSe : Select the right sound for each music genre. Choose either
<3D> can be set between 0~5 levels, and <Bass Enhance> between 0~3 levels. If
User EQ Set : Select a sound effect (EQ). If <User EQ Set> is selected, <DNSe> will be changed to <User EQ>.
In <User EQ Set> settings, use [ 
, , 
, 
] button to select the desired User EQ
Set and then press the 
button.
Press the [ 
] or [ 
] button to select <YES> and then press the 
button to save.
Play Mode : Select playback mode such as repeat settings. Select from <Normal>, <Repeat>, <Repeat One>, and <Shuffle>.
Play Speed : Adjust the playback speed of music/voice recording. Select <x0.7>, <x0.8>, <x0.9>, <x1.0>, <x1.1>, <x1.2>, or <x1.3>. (The higher the number is, the faster the playback speed is.)
Skip Interval : Set the length of the segment the file will skip when you press the [ 
] or [ 
] button during playback. Select either <1 Track>, <3 sec>, <5 sec>, <7 sec>, <10 sec>, <30 sec>, or <1 min>.
If the file was developed with a variable bit rate, the actual length of the NOTE skip interval may not be exactly what you select.
The play speed and skip interval will return to the default (play speed: x1.0,
skip interval: 1 track) each time you turn on the player.
If the play speed is set to other than x1.0, <DNSe> will be switched to <Normal>.
The adjusted play speed may differ from the actual speed, depending on the file.
What is DNSe?
Digital Natural Sound Engine (DNSe) is a sound effect function for MP3 players
developed by Samsung. It supports the best stereophonic sound effect to the music.
18 _ the basics