Manuals / Brands / Computer Equipment / Computer Drive / SanDisk / Computer Equipment / Computer Drive

SanDisk 5000 2.3 System Power Requirements , 2.4 System Performance ,

1 18

Download 18 pages, 931.8 Kb

SanDisk uSSD 5000 Product Manual

© 2007 SanDisk® Corporation 7 August 2007

2.3 System Power Requirements

All values quoted in Table 3Table 3: Power Requirements

are typical at 25° C and nominal supply voltage unless otherwise stated.

Table 3: Power Requirements

Power Mode 5V +/- 10% IDD

Standby 2.5 mA

Operating HS Read 150 mA

Operating HS Write 150 mA

Idle HS 100 mA

2.4 System Performance

Table 4 lists the performance parameters of the SLC and MLC flash-based

configurations:

Table 4: Performance

Specification Parameters

Maximum performance for capacity of 1 GB (SLC flash configuration)

Sequential Read 31.6 MB/sec

Sequential Write 24.8 MB/sec

Random Read TBD

Random Write TBD

Maximum performance for 2 GB, 4 GB and 8 GB (SLC flash configurations)

Sequential Read 31.6 MB/sec

Sequential Write 24.8 MB/sec

Random Read @ 4KB access 5.7 MB/sec

Random Write @ 4KB access 1.2 MB/sec

Maximum performance 2 GB, 4 GB and 8 GB (MLC configuration)

Sequential Read 29.9 MB/sec

Sequential Write 12.8 - 9.0 MB/sec (based on capacity)

Random Read TBD

Random Write TBD

Host compatibility

USB 2.0 Up to 60 MB/sec

Note: Benchmark performed using HD Bench on

Windows 2000 and Winsat on Microsoft Windows Vista

Contents

Main SanDisk uSSDTM 5000 Solid State Drive Product Manual Table of Contents List of Tables 1. Introduction 1.1 General Description 1.1.1 Applications 1.1.2 Rugged and Reliable 1.1.3 High Performance 1.1.4 Cost Effective 1.2 Features 1.3 Scope 1.3.1 Technology Independence 1.3.2 Defect and Error Management 1.3.3 Wear-leveling 1.3.4 Bad Block Management Product Specifications 2.1 Formatted Capacities Table 1 shows the formatted capacities for the uSSD 5000: Table 1: Formatted Capacities 2.3 System Power Requirements Table 3: Power Requirements 2.4 System Performance Table 4 lists the performance parameters of the SLC and MLC flash-based configurations: Table 4: Performance 2.5 System Reliability 2.5.1 MTTF 2.6 Endurance 2.7 Electrical Interface 2.7.1 uSSD Connector 2.7.2 Electrical Specifications 2.7.2.1 Absolute Maximum Ratings Table 9: Absolute Maximum Ratings 2.7.2.2 DC Characteristics Table 10: DC Characteristics for Full-Speed Operation (TA = 25C) 2.8 Physical Specifications 2.8.1 Standard Configuration 2.9 Product Markings and Traceability 2.10 OS Support 2.11 Regulatory Compliance Appendix A. Ordering Information Table 14: Ordering Information Appendix B. Limited Warranty I. Warranty Statement II. General Provisions III. What this Warranty Covers IV. Receiving Warranty Service V. State Law Rights Appendix C. Disclaimer of Liability SanDisk Corporation Policy