Sangean Electronics RCR-1

NAP TIMER

The Nap timer button [3] allows you to adjust the interval from 10-120

minutes in 10 minute steps before the alarm signal starts. If you wish

to turn off the Nap timer before the time is up simply adjust the

number of remaining minutes by pressing NAP key to off and

release. NAP will disappear from the display. The NAP timer may be

turned off by pressing Power key [1]

SLEEP AUTO SHUT OFF

Pressing and holding the power button [1] will activate the sleep

function. This function steps in 15 minute increments. This Sleep

function will turn off the radio at the pre-selected time. Pressing the

power button [1] will turn off function.

HEADPHONES

A jack is provided to allow headphone usage. When headphones are

used the internal speaker is disconnected.

ALARM LEVEL ADJUSTMENT

An alarm level control [9] is provided on the bottom of the radio.

DISPLAY BACKLIGHT CONTROL

Button [4] allows two step adjustment of display brightness

DISPLAY BRIGHTNESS ADJUSTMENT

With display backlight control in dark position, Display Brightness

Adjustment [8] may be used to fine tune display brightness.