Sanitaire 800 warranty Danger, Grounding Instructions, How To Assemble, Attach the Handle

Grounding Instructions

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER

Improper connection of an equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance. If it will not fit the outlet, have proper outlet installed by a qualified technician.

This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in Figure A. A temporary adapter which looks like the adapter illustrated in Figure B may be used to connect this plug to a two-pole receptacle, as shown, if a properly grounded outlet is not available.The temporary adapter should be used only until a properly grounded outlet, Figure A, can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

CAUTION: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code.

GROUNDED	GROUNDED
OUTLET BOX	OUTLET BOX
	ADAPTER

GROUNDING BLADE	METAL
IS LONGEST OF THE	SCREW
THREE BLADES	GROUNDING
FIGURE A	TAB	FIGURE B

HOW TO ASSEMBLE

CAUTION: Completely assemble vacuum cleaner before using. Assembly Packet is with owner’s guide.

Attach the Handle

Push lower handle into handle socket on the base.

NOTE: Check to be sure slot in handle is positioned correctly, see Detail.

Align the holes on the lower handle and the socket. Insert a 2-part bolt (A) in the bottom center of the handle and tighten.

Push upper handle onto lower handle. Make sure grip curves away from cleaner. Align the holes on the upper handle to the holes on the lower handle. Insert a 2-part bolt (A) in center of the handle and tighten.

Attach Lower Cord Hook

Make sure cord hook (B) is pointing downwards. Press the power cord into the groove on the cord hook pulling any slack toward the base of the cleaner. On the cord hook, find the curved tab and place in slot on lower handle section, keep cord taut while pressing the cord hook to the left until it snaps into slot on opposite side of handle. The hook should point downward on the same side that the cord exits the hood.

AB

2-Part Bolt Lower Cord Hook

DETAIL A

B

A

3