Attach Lower Handle
Raise the dust cup support. Push the lower handle (largest end down) through the tube of the dust cup support and into the handle socket at the back of the cleaner. Align the holes, insert a
A
Tube A
Handle
Socket
Dust Cup
LowerSupport
Handle
Extension Cord
To install or change the extension cord, slip cord lock over one of the cords ends. Plug the pigtail into the extension cord. Clip both ends of the cord hook behind the plug ends to make a secure connection.
The cleaner has a convenient cord storage hook attached to the handle. However, some models feature a quick release cord hook on the upper handle. A downward twist of the cord hook frees the cord for quick removal. With either style, wind the cord around the hooks for storage. Fasten the plug to the cord to prevent unwinding.
Assemble Upper Handle
Push upper handle onto lower handle. Make sure grip curves away from cleaner. Align the holes on the upper handle to the holes on the lower handle. Insert a
A |
| Upper | |
A | |||
Handle |
Lower
Handle
Handle
Socket
Secure Cord Clamp
Secure the electrical cord to the dust cup support with the cord clamp and screw (C). Place the cord clamp over the electrical cord. Screw the clamp to the tab below the right latch; start the screw by hand, then tighten.
C
NOTE: Make sure cord from upper handle to cleaner runs along side of tubes and not wrapped around tubes.
Hook Bag Top
Slip the ring at the top of the cloth bag over the bag support hook on the back of the cord hook.
4