(continued)
3 Fold BAG CLOSURE | 4 Insert finger into upper |
FLAP down and push | left notch then pull out |
behind rubber seal. | and remove bag. |
How to Install Disposable Dust Bags – Style MM
CAUTION: Turn off vacuum and unplug the electrical cord before changing dust bag or cleaning motor filter. Never operate the vacuum cleaner without the dust bag or filter.
1.Turn off and unplug cleaner.
2.Open bag cover by pushing latch.
3.Clean motor fi lter by rinsing under warm water and let air dry if heavily soiled.
Latch
4.Open bag folds slightly.
5.Place bag in cleaner.
6.Tuck bag corners under collar.
7.Swing bag cover closed and push to latch.
Motor Filter
How to Install HEPA Filter, PN 60666A
(on some models)
Check the HEPA fi lter with each disposable dust bag change. Replace twice a year or after every six bag changes.
Upper Filter Tabs
Bottom Clips
Rear Housing Tabs
Bottom Clips
Insert upper fi lter corner tabs fi rmly under rear housing tabs and pivot fi lter down until bottom clips on fi lter click securely into place on the cleaner.
How to Remove HEPA Filter
Grasp the bottom clips on the fi lter and pull out and down to release the upper fi lter tabs from the rear housing tabs on the cleaner.
Replace with 
filter, part number 60666A.
5
