HOW TO USE
CAUTION: Moving parts. Make sure on/off switch is in off position before plugging in.
A carpet should be cleaned regularly over heavily traveled areas, and once a week over the entire carpeted area. Vacuum slowly, making several passes (forward and backward) over the carpet, covering small areas at a time. The time required to clean the carpet will depend on several
5Push ON/OFF Switch
(A thermostat automatically shuts the motor off if it overheats, see Automatic Motor
ON/OFF Switch
1 
Connect Hose
2Rotate Swivel Hook to release cord
3Plug In
Swivel Hook
4Store Tools
Crevice Tool
HEPA
Filter
(on some
models)
Automatic Motor Shut-Off
To protect from overheating, this vacuum cleaner is equipped with a thermostat which automatically shuts off the motor if it overheats. Should this happen:
1.Turn off the switch and unplug the cleaner because the thermostat will allow the cleaner to automatically start running again when the motor cools (approximately 30 minutes).
2.Check the hose, bag and filter regularly, as a clogged hose, full bag or dirty fi lter could cause the motor to overheat.
3.Call a Eureka Service Station if the cleaner will not operate after cooling for approximately 30 minutes.
Cleaning Accessories
Attach wands and cleaning tools
(Wands may vary by model)
Open the Slip Ring to reduce suction.
Tool Caddy
Combination
Floor Tool
3
