How To Use
4 CORD RETAINER
HANDLE
5 COLLAPSE
BUTTON
CORD
6 STORAGE
HOOKS
HANDLE
7 RELEASE
PEDAL
8 RESET BUTTON
9
RESET
LIGHT
4Cord Retainer
When preparing to use vacuum, fi rmly push the electrical cord down into the cord retainer. This will place the electrical cord out of the way while you
vacuum.
5Handle Collapse Button
To collapse the handle from the upright position, press handle collapse button, rotate handle down until latch in hand grip locks onto the body.
Cord Storage Hooks
This unit has two convenient cord storage hooks attached to the handle. Wind the cord around the hooks and fasten the plug to the cord to prevent unwinding.
7Handle Release Pedal
The handle release pedal is located next to the fl oor between the two wheels on the back of the cleaner. Step on the handle release pedal and pull back handle to find a comfortable operating position. Handle will automatically lock into storage position when handle is rotated into upright position.
8Reset Button
This unit uses a cogged, non- stretch belt. If a large object causes the brush roll to jam, the brush roll motor shuts off and the Reset Light illuminates. Turn off and unplug the unit. Check the brush roll for debris and clean if needed. Press the reset button, plug in the unit and turn on to continue cleaning.
9Reset Light
The reset light is a neon light that illuminates when the brush roll jams. See reset button above for actions to take when this light
comes on.
4
