HOW TO MAINTAIN
These instructions serve as a guide to routine maintenance. To avoid unnecessary service calls, clean motor filter and empty the tank often. Empty the liquids after each use.
Motor Filter
CAUTION: Turn off power switch and unplug the electrical cord before service. Never operate cleaner without motor filters or with defective filters. Do not collect oily or hazardous materials.
Check and clean the Pleated Filter once a month to maintain good performance. The filter can be cleaned by washing with mild detergent and warm water. Be sure pleated filter is completely dry before reinstalling.
IMPORTANT: Avoid touching filter media with abrasive materials or using a brush to clean between pleats. This will permanently damage filter causing dust to bypass filter.
How To Clean Filter
•Remove the lid. Place upside down on a hard surface.
•Lift up on filter, twisting and pulling, to remove it from the ball float cage.
•To remove debris, tap filter against waste container. If filter needs further cleaning, wash in warm water. To clean between filter pleats, gently fan open under running water.
•When all parts are cleaned, follow the above steps in reverse to reassemble.
NOTE: Do not put any parts in a dishwasher.
NOTE: Your washable filter may need to be replaced if cleaning it does not restore cleaning performance.
Filter
Ball Float
Cage
Lid 
Be sure to use GENUINE Sanitaire replacement filter, 28680.
10
