2 Press ▲ or ▼ to select “TV Location”, then press ◀ or ▶ to select “Store” or “Home”. This product qualifies for ENERGY STAR in Home mode default setting.
NOTE:
• This unit has been preset to STORE brightness. This setting does not qualify under ENERGY STAR. To reduce brightness and energy consumption, change setting to ‘HOME’. This setting does qualify under ENERGY STAR.
• The device may not conform to the ENERGY STAR standard after Reset is performed or the Backlight is adjusted.
3 Press ▲ or ▼ to select “Signal Type”, then press ◀ or ▶ to select “Cable” or “Air”.
4 Press ▲ or ▼ to select “Automatic Search”, then press ▶ or ENTER.
5 Now the “Auto Setup” starts. After the auto setup is completed, the TV channel appears on the screen.
•Depending on the reception condition, it may take from 15 minutes to 30 minutes to complete memorizing digital cable channels. Please be patient.
NOTE:
• If you press EXIT in the process of “Auto Setup”, the Auto Setup stops and changes to the normal screen.
• When you make a menu selection, your changes occur immediately.You do not have to press EXIT to see your changes.
TV operation
1 | To turn on the TV, press |
| (POWER). |
| |||
| |||
(POWER indicator on the front of the unit | |||
| changes blue. It may take approx. 10 seconds for | ||
2 | a picture to appear on screen.) | ||
Adjust the volume level by pressing VOL (VOLUME) | |||
+ or | |||
| the screen by blue bars. As the volume level | ||
| increases, so do the number of bars. If the | ||
| volume decreases, the number of blue bars also | ||
| decreases. | ||
Set the Signal Type option to the appropriate |
| ||
3 position (see “Air/Cable selection” on page 18). |
| ||
Press the Direct Channel Selection |
| ||
4 buttons to select the channel. |
| ||
(If you press only channel number, channel |
| ||
ENGLISH | |||
selection will be delayed for a few seconds.) | |||
TO SELECT ANALOG CHANNELS | |||
Press |
| ||
channel 2, press 2, then press ENTER. |
| ||
Press the 2 digits in order. Example, to |
| ||
| select channel 12, press 1, 2, then press |
| |
ENTER. |
| ||
Press the 3 digits in order. Example, to |
| ||
| select channel 120, press 1, 2, 0, then press |
| |
| ENTER. |
| |
TO SELECT DIGITAL CHANNELS
Press the first
Example, to select channel
• If a channel is selected with only audio content, “Audio only” will be displayed on the screen.
• If a channel is selected with a weak digital signal, “Digital channel signal strength is low” will be displayed on the screen.
The same program may be available on either an analog channel or a digital channel.You may choose to watch either format.
• If a channel is selected to which you have not subscribed, “Digital channel is encrypted” will be displayed on the screen.
VHF/UHF/CABLE CHANNELS
Air
VHF
UHF
NOTE:
• If a channel with no broadcast is selected, the sound will automatically be muted.
• It may take a few seconds for a digital channel picture to appear on screen after being selected.
To select the video input source
To view a signal from another device connected to your LCD TV, such as a VCR player, press INPUT SELECT, then press ▲ or ▼ or corresponding Number buttons
Input Select
0.TV
1.Video1
2.Video2
3.Component
4.HDMI1
5.HDMI2
6.HDMI3
7.PC
CH /
Press and release CH / . The channel automatically stops at the next channel set into memory.
For proper operation, before selecting channels, they should be set into the memory. See “Memorizing channels” on page 18.
15
