Sansui SLED5000 Using an AV Amplifier with built-in digital surround, Rear and right of the unit

Connections to other equipment

Using an AV Amplifier with built-in digital surround

If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Right of the unit

To COAXIAL OUT

TV

Front

Speaker

(Left)

Front

Subwoofer Speaker

(Right)

Coaxial digital cable
(not supplied)
To Coaxial	Center Speaker
Digital Audio Input
Surround	Surround
Speaker (Left)	Speaker
AV Amplifier with built-in digital surround decoder	(Right)

NOTE:

• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

To connect a HDMI or a DVI device to the unit

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear and right of the unit

	To HDMI output
HDMI cable (type A connector)
To HDMI IN	(not supplied)	or
HDMI - to - DVI adapter cable
	(HDMI type A connector)
	(not supplied)
	Audio cord (not supplied)
To AUDIO IN	To DVI output

HDMI device

DVI device

13EN