C

CAUTION:

English

CAUTION: Avoid potential personal injuries and property damage!

To Reduce the Risk of Electric Shock - Use Only in Dry Locations Indoors!

Risk of Electrical Shock. Do not plug into another relocatable power tap.

This device features an internal protection that will disconnect the surge protective component at the end of its useful life but will maintain power to the load - now unprotected. If this situation is undesirable for the application, follow the manufacturer’s instructions for replacing the device.

Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and the electrical service panel.

The input plug of this power tap is intended to serve as the disconnect device, it shall be easily accessible and withdrawn.

This power conditioner does not contain internal Circuit Breaker protection; INSTALLER MUST ensure that the input of this power conditioner is connected individually to an electrical service panel that is protected with a UL Listed 20A (Minimum) Circuit Breaker for overload protection of the power conditioner.

All doors and accessories must be grounded.

Do not use this product for any purpose not explicitly specified by Sanus Systems.

If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact Sanus Systems Customer Service or call a qualified contractor.

Sanus Systems is not responsible for damage or injury caused by incorrect assembly or use.

Français

ATTENTION : Évitez les blessures et les dégâts matériels éventuels !

Afin d’éviter tout risque de choc électrique : utilisation en intérieur uniquement !

Risque de choc électrique. Ne pas brancher sur un autre branchement d’alimentation.

Cet appareil comporte une protection interne qui des connectera le composant de protection contre les surtensions à la fin de sa durée de vie utile mais il conservera l’alimentation vers la charge, qui sera alors non protégée. Si cette situation n’est pas souhaitée pour l’application, suivez les instructions du constructeur pour remplacer l’appareil.

N’installez pas cet appareil s’il n’y a pas au moins 10 m ou plus de câble entre la prise électrique et le panneau de distribution électrique.

La prise d’entrée de ce branchement d’alimentation est destinée à servir de dispositif de déconnexion, son accès et son retrait devront être faciles.

Cet appareil de conditionnement d’alimentation ne contient pas de disjoncteur de protection interne ; L’INSTALLATEUR DOIT s’assurer que l’entrée de cet appareil de conditionnement de l’alimentation

et connectée individuellement à un panneau de distribution électrique protégé par un disjoncteur de 20 A agréé UL (minimum) pour la protection contre les surcharges de l’appareil de conditionnement d’alimentation.

Tous les volets et accessoires doivent être mis à la terre.

N’utilisez pas ce produit à d’autres fins que celles spécifiées explicitement par Sanus Systems.

Si vous ne comprenez pas ces instructions, ou si vous avez des doutes sur la sécurité de l’installation, sur le montage ou l’utilisation de ce produit, contactez le service client de Sanus Systems ou appelez une entreprise qualifiée.

Sanus Systems n’est pas responsable des dommages ou des blessures provoqués par un montage ou une utilisation incorrecte.

Español

PRECAUCIÓN: Evite lesiones físicas y daños materiales.

Para reducir el riesgo de descarga eléctrica, no utilice el dispositivo al aire libre.

Riesgo de descarga eléctrica. No enchufe el dispositivo en otro tomacorriente múltiple.

Este dispositivo cuenta con un mecanismo de protección interno que desconectará el componente de protección contra sobretensión al finalizar su vida útil pero continuará suministrando energía a la carga, que quedará sin protección. Si esto no fuese adecuado para la aplicación, siga las instrucciones del fabricante para reemplazar

el dispositivo.

No instale este dispositivo si no hay, como mínimo,

10 m (30 pies) de cable o más entre el tomacorriente y el panel eléctrico.

El enchufe de este tomacorriente múltiple constituye su mecanismo de desconexión, por lo cual deberá ubicarse en un lugar al que pueda accederse fácilmente para retirarlo.

Este estabilizador de corriente no cuenta con disyuntor interno. El INSTALADOR DEBERÁ cerciorarse de que

la alimentación del dispositivo se conecte en forma individual a un panel eléctrico que se encuentre protegido mediante un disyuntor de 20 A (mínimo) aprobado por la UL.

Todas las puertas y todos los accesorios deben estar conectados a tierra.

No utilice este producto para ningún otro propósito que no sea el explícitamente especificado por Sanus Systems.

Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, del ensamblado

o del uso del producto, contáctese con el servicio de atención a clientes de Sanus Systems o llame a un técnico calificado.

Sanus Systems no se responsabiliza por ningún daño o lesión resultante del montaje incorrecto o el uso indebido.

4

6901-002042 <00>

Page 4
Image 4
Sanus Systems CAPCO1 manual 6901-002042

CAPCO1 specifications

The Sanus Systems CAPCO1 is a versatile and innovative equipment designed for cable management and organization. This cutting-edge product is tailored to meet the needs of modern households and professional settings, effectively addressing the clutter and complexity often associated with audio-visual setups.

One of the standout features of the CAPCO1 is its sleek design, which complements a wide range of home or office aesthetics. The unit is available in multiple finishes, allowing users to choose a style that matches their environment. Its compact dimensions make it suitable for various locations, whether on a wall mount or floor stand.

The CAPCO1 comes equipped with advanced cable management technologies. Its innovative design includes numerous channels and compartments that facilitate the organization of cables, preventing tangles and maintaining a neat appearance. Users can easily route power cables, HDMI lines, and speaker wires through the dedicated pathways while keeping them hidden from view. This thoughtful arrangement not only enhances the visual appeal of a space but also simplifies maintenance and troubleshooting.

Another significant characteristic of the Sanus Systems CAPCO1 is its durability and sturdiness. Constructed from high-quality materials, it is designed to withstand regular use over time. This reliability ensures that the unit remains functional and effective in managing cables regardless of the technological demands placed upon it.

Furthermore, the CAPCO1 promotes improved airflow around devices. Proper ventilation is critical for maintaining the performance and longevity of audiovisual equipment, and the CAPCO1’s design facilitates sufficient airflow. It helps prevent overheating, ensuring that devices remain operational during extended use.

The unit is also user-friendly, with intuitive installation instructions that allow users to set it up quickly without the need for professional assistance. This simplicity and ease of use make it an excellent choice for both tech-savvy individuals and those new to audio-visual systems.

In summary, the Sanus Systems CAPCO1 stands out in the realm of cable management solutions due to its stylish design, advanced technology, robust build, and ease of use. By effectively addressing common challenges associated with cable clutter, the CAPCO1 enhances the overall functionality and aesthetics of any space, making it an essential tool for anyone looking to improve their audio-visual environment.