Assembly Instructions for Model EFB, Speaker

Assembly Instructions for Model: EFB

Assemble your Sanus Systems Model EFSat, or HTB Speaker Foundation, attaching the L-Bracket. You will need the EFB Universal Mounting Bracket (sold separately) to mount the speakers.

Use a Phillips screwdriver to remove the two plastic wall spacers that are on the back of your speaker, located just above the speaker terminal

plate.

Pull the speaker wires through the wire management and connect them to your speaker; then, lay the speaker down with the back facing up.

Speaker

Wires

Open the EFB Package and remove the small Black Spacers and place them over the holes in the back of your speaker where the two plastic wall spacers were removed.

Align the top two slots of the EFB over the two small Black Spacers.

Using a Phillips screwdriver, and the two Screws provided with the EFB, secure the EFB and Spacers to the speaker, taking care as to not overtighten the screws.