Step 9: Hang TV and Safety Bolt
Warning: Lifting the television may require two people!
To hang the TV onto the Wall Bracket (b) first hook the Monitor Brackets (e,f) over the top of the Wall Bracket, then let the bottom of the Monitor Brackets rotate in under the bottom of the Wall Bracket as shown in the Detailed View of Diagram 9a.
Insert the Safety Bolts (t) into the threaded holes in the bottom of the Monitor Brackets (e,f) and tighten them with the Allen Key (oo) so that they sit behind the bottom tab on the Wall Bracket (b) as shown in the Detailed View of Diagram 9b. Finally set the tension of the knobs on the Monitor Brackets and you are free to adjust your new flat panel TV.
Diagram 9a | Detailed View | Diagram 9b | Detailed View |
e,f
t
b
e,f
Step 10: Shelf Bracket Cap
Place the Shelf Bracket Cap (m) over the Shelf Bracket (k) so it hides the M8 Allen Bolt (r) as shown in Diagram 10.
Diagram 10 | Detailed View |
m
k
r
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7.15.05
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
