Assembly Instructions for Television TurntablesTM TV13, TV20, TV27, TV32
Congratulations on your purchase! Sanus Systems Television TurntablesTM are functional, attractive, and inexpensive. They are finished with a black powder that is both durable and beautiful. Please check carefully to make sure there are no miss- ing or defective parts. Never use defective parts. Improper assembly may cause damage or injury. If you do not understand these directions, or have any questions about this assembly please contact Sanus at 800.359.5520 or www.sanus.com. We can quickly assist you with installation questions and missing or damaged parts.
Supplied Parts: (1) Television Turntable
Supplied Parts: (1) Self Adhesive Protective Feet (pad of 4)
Step 1:
Position the Turntable so the black nylon swivel is facing up. Locate the circles at the end of each spoke. Next, place a Adhesive Foot inside each circle, as shown in Diagram 1.
| Diagram 1 |
Adhesive | Circle |
| |
Foot | Bottom of |
| Turntable |
NOTE: If you are going to use the optional
page, otherwise, proceed to Step 2.
Diagram 2
Step 2:
Top of Turntable
Flip the Turntable over and place it in the desired position on a shelf or cabinet so the Adhesive Feet are facing down and are in direct contact with the shelf or cabinet as shown in Diagram 2.
| Assembly Instructions for Optional |
| ||
|
| TV Turntable (sold separate) | ||
|
|
| ||
Contents: (1) | Base |
|
| |
Contents: (2) | Support Pillars |
|
| |
Contents: (4) | Plastic Dowels | Support |
| |
Contents: (4) Allen bolts |
| |||
Pillar | Support | |||
Contents: (1) Allen Wrench | ||||
| Pillar | |||
|
|
|
Base
Sanus Systems 2221 Highway 36 W. St. Paul, MN 55113
800.359.5520 www.sanus.com 7.6.04