Manuals / Brands / Computer Equipment / Projector / Sanyo / Computer Equipment / Projector

Sanyo 1080HD Clean by using the Cleaning function in the Setting Menu

1 60

Download 60 pages, 5.24 Mb

46

Turn the projector on and press the MENU button to display

the On-Screen Menu. Select the Setting Menu with the Point

ed buttons. Press the Point 8 or OK buttons to access the

submenu items.

1

Put the blower’s nozzle into a hole.

2

Blow air into the projector with the blower watching the

position of the dust from the screen.

3

Set the projector back into the right position, then press any

button on the top control or on the remote control to quit the

Cleaning function.

4

5

Clean by using the Cleaning function in the Setting Menu

Select Cleaning and then press the Point 8 or OK buttons.

The screen is blacked out temporarily.

Turn the projector over. Put your finger on the hole cover’s

tab and pull to open the hole cover.

When cleaning is done, pull the blower out of the hole and

replace the hole cover.

6

7

Put your finger on

the hole cover’s tab

and pull.

The nozzle will go no

further than a certain

point when it is put

into the hole. Do not

attempt to push the

nozzle further in, or

it could break and be

stuck inside of the

projector.

* Do not open the hole cover except when you clean the inside of the projector to

prevent foreign matters from getting into the projector. If it is open especially while

operating the projector, the optical parts could damage.

Which hole to put the nozzle in?

When you look at the screen:

● When red spots (dust) are particularly noticeable, put the

nozzle into the R panel cleaning holes.

● When green spots (dust) are particularly noticeable, put

the nozzle into the G panel cleaning holes.

● When blue spots (dust) are particularly noticeable, put the

nozzle into the B panel cleaning holes.

Wave the nozzle back and forth inside of the

projector.

(Do not attempt to bend the nozzle.)

Use only the supplied blower and nozzle.

Do not use a commercially available

compressed air duster. It causes the

interior of the projector to malfunction

with release of cold liquid propellant. We

could not guarantee the malfunction of

breakage by using other tools.

Cleaning

Select Cleaning in the

Setting Menu.

Maintenance and Cleaning

Tab

Hole cover

Contents

Main Features and Design Lens Shift Color Management Auto Iris Compatibility Table of Contents To the Owner Safety Instructions Moving the Projector NO DOWNWARD NO SIDEWARD CAUTION ON CEILING MOUNTING Installing the Projector in Proper Position Compliance AC Power Cord Requirement AC Power Cord for the United States and Canada: THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILy ACCESSIBLE. Part Names and Functions Rear Terminal Top Control Remote Control Remote Control Operating Range Remote Control Battery Installation 1 2 3 Adjustable Feet Positioning the Projector Installation Moving the Lens Connecting to Video Equipment (Component) Connecting to Video Equipment (Video, S-Video) Connecting to a Computer Connecting to Video Equipment (HDMI, RGB Scart) NOTE ON THE POWER CORD Projector side AC Outlet side For the U.S.A. and Canada CAUTION Connecting the AC Power Cord 4 Basic Operation 2 Turning Off the Projector How to Operate the On-Screen Menu Menu and its Functions LIGHT button Remote Control Operation Zoom and Focus Adjustment RESET button SCREEN button BACK button IMAGE ADj. button BRIGHTNESS button FREEZE button CONTRAST button COLOR button Input Video or S-Video Component 1 or Component 2 Menu Operation 3 Input 4 5 6 Input HDMI 1 or HDMI 2 Computer 2 Image Mode Selection Image 2 3 Image Adjustment Image Mode Adjustment Page Page Page COLOR MANAGEMENT Page Picture Adjustment 1 2 Picture Position and Screen Adjustment 3 Screen Screen List of the projected images Setting Page Page Page To change the code of the projector: To change the code of the remote control: Page Input Source Information Display Information Maintenance and Cleaning TOP CONTROL Warning Indicator TOP CONTROL Cleaning the RGB panels If the nozzle is pulled out .... Clean by using the Cleaning function in the Setting Menu RECOMMENDATION Cleaning the Air Filter Reset the filter counter (p.48). 6 7 Resetting the Filter Counter Filter counter Cleaning the Projection Lens Cleaning the Projector Cabinet ORDER REPLACEMENT LAMP CAUTION 6 Lamp Replacement CAUTION LAMP HANDLING PRECAUTIONS IF A LAMP EXPLODES, THE FOLLOWING SAFETy PRECAUTIONS SHOULD BE TAKEN. Resetting the Lamp Replacement Counter Troubleshooting Solutions Problem: Appendix WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. Solutions Problem: Indicators and Projector Condition Projector Condition Indicators Menu Tree Image Image adj. Input Valuechangesdependingon theselectedimagemode. Screen Picture adj. Setting Information System Mode Chart Technical Specifications Pin Configuration (This cable is used for RGB Scart 21-Pin Video output of video equipment.) Optional Parts Configurations of Terminals Terminal: HDMI Pin Configuration Computer terminal Dimensions Unit: inch (mm)