Sanyo AH-23631 Lens Replacement Procedure For a type Cabinet, Remove the Lens, Fig-1-1 Fig-1-2

Lens Replacement Procedure (For A type Cabinet)

Perform the steps 1-2 for lens replacement.

First set the lens at the center position with lens shift adjustment.

1

Remove the Lens

While pressing the Lens release button on the top of the cabinet, turn the lens counterclockwise until it stops and pull it out slowly from the projector.

Be careful not to drop the lens.

LENS RELEASE BUTTON

Fig-1-1

Fig-1-2

2

Mount the Lens

1.Remove the protective caps (front and back) on the lens.

2.Insert the lens into the Lens Bracket of the projector as matching the red mark on the lens to that on the Lens Bracket.

3.Slowly turn the lens clockwise until it clicks. Make sure that the lens is fully inserted to the projector.

Red mark

Fig-2

-2-