Sanyo AH-23661 manual Mount the Light-Block Sheet Base, Mount the Top Cabinet and the Lens Cover

5

Mount the Light-Block Sheet Base

Mount the Light-Block Sheet Base.

LIGHT-BLOCK

SHEET BASE

HOOKS

LIGHT-BLOCK

SHEET

Light-Block Sheet should be located under the hooks.

HOOKS Fig-5

6

Mount the Top Cabinet and the Lens Cover

For the Cabinet Fig. 6-1
1. Mount the Top Cabinet with 2 screws.
2. Mount the Lens Cover.
Position the mark "UP" of the Lens Cover on top and
push into the cabinet. Turn the Lens Cover
clockwise until it is securely locked.
{When LNS-W11 (AH-23631) is installed, the Lens	UP
Cover is unnecessary.}
For the Cabinet Fig. 6-2
1. Mount the top cabinet with 2 screws.
2. Push into the Lens Cover to the Top Cabinet.
Confirm the top and bottom of the lens cover.
The part circled in Fig-6-2 should be fitted.
{When LNS-W11 (AH-23631) is installed, the Lens
Cover is unnecessary.}

Turn the projector on and check Lens shift, Zoom and Focus is operating properly.

If Light-Block Sheet interfere with those operations, check if the Light-Block Sheet is set properly. LNS-W11 (AH-23631) cannot adjust the Zoom and Focus at the Remote control or the projector.

Fig-6-1

Fig-6-2

-5-