7
Press the MENU buttonand select Sound using the eor d
buttons, press the 8
button to enter.
Select and adjust to obtain the best sound settings for your
environment using the e, dand 7 8buttons.
Press the MENUto return to Main Menu. These settings
automatically store when you exit the menu.Press the MENU button
to exit menu.
■ OSD Language
Use the 7or 8buttons to select the prefered OSD language
(French, German, Italian, Spanish, Dutch). Press the MENU but-
ton to exit
■ AV2 setting
In setting menu, to select AV2 press the dbuttonand set to Y,Pb,Pr
or RGB, H/V depending on your external equipment.
1. Press the MENU button. Select Setting using the eor dbutton
press the 8button to enter.
2.Select AV2 setting using the eor dbutton.
3.Press the 7or 8button to select either Y,Pb,Pr or RGB H/V.
4. Press the MENU button to exit, this automatically stores your
changes.
5. Press the MENU button to exit.
■Off-timer setting
The Off timer will switch the monitor into the standby mode when the
selected time has elapsed.
1. Press the MENU button. Select Setting using the eor dbutton
press the 8button to enter.
2.Select Timer using the eor dbutton, press 8buttons to enter.
3. Press the 7or8button to change time.
The time changes in 5 minute steps.The maximum time is 120 min-
utes.
If you have set the off timer, a display appears in the corner of the
screen when the recall button is pressed.
✐ If the monitor is switched off by the standby button
4
on the
remote control or by the standby switch
4
on the bottom of the
LCD monitor the timer settings will be cancelled.
Connect your PC to either PC-INor RGBHV on the rear of the set.
Once connected select PC mode or AV2 (RGBHV, see page 4 for
AV2 input settings) via the vbutton on your remote control. The
set will become a monitor for the PC.
By pressing the MENU button on the remote control a menu window
will appear on screen, this allows the settings to be adjusted.
To adjust the Picture settings select picture using the eor d buttons
on the remote then the 8 button to enter the following picture
settings menu.
Press the 7or 8buttons to adjusted the Picture brightness and the
same to adjust the contrast of the picture. Press the 8button to
enter sub menus
Picture positionchanges the picture horizontally or vertically, this is
done by using the 7or 8buttons on the remote control.
Video adjustchanges the Phase and the clock of the screen. If the
picture is blurred or grainy this function will adjust it to a clearer
pictureby using the 7or 8buttons on the remote control.
Auto Adjustwill automatically adjust the picture by using the 8
button. This will change all the above settings automatically .Auto
adjust can also be achieved by pressing the /recall
button on the remote control without having to select the menu
Resolutiondisplays the current resolution of the picture. This is for
information only and cannot be adjusted.
White tone:Using the 7or 8buttons it is possible to adjust the
colour tone of the picture using the White toneRed(R) / Green (G)/
Blue(B). This will adjust the picture to show more or less of the
chosen colour. For example if red is selected you can adjust the pro
portion of red in the picture to increase or decrease using the 7or 8
buttons
Native Resolutionis used when the PC can output WXGA
1366 x 768. The setting on your Monitor set can be changed
to receive XGA/WXGAsignal using the 7or 8buttons . Once the
native resolution has been selected, save the settings by switching
the monitor off then on using the standby button.
For Sound settings refere to previous menu
Setting: select the menu button on your remote and using the eor
d buttons to select Settings. The 8 button will enter the settings
menu.
Timer and AV2 settings are the same as in all other input modes
(pg 7)
Power save if turned ON will switchthe monitor into Powersave
mode after 1 minute if no signal is detected,the LED light will turn a
brighter blue to indicate stand by.The monitor will automatically turn
backon when a signal has been detected (PC input / RGBHV).
Use 7or 8buttons to select power save ON or OFF.
rD
MENU OPERAMENU OPERATION
TION
: Select : Adjust MENU : Exit
Setting
OSD Language English
Timer
AV2 setting Y,Pb,Pr/RGB, H/V
Text Language Greek/ East/ West/ Cyrillic
Setting menu
MENU
Timer
TIMER 5 ~ 120
: Select : Adjust : Exit
GB GB
PC menu settings
Main Menu
Picture
: Select : Adjust MENU: Exit
Setting
Sound
Picture
: Select : Adjust MENU: Back
Brightness
Contrast
Position
Video Adjust
Auto Adjust
Resolution
White Tone R
White Tone G
White Tone B
1024 X 768 @60Hz
Native Resolution XGA / WXGA 1366 x 768
: Select : Adjust MENU : Exit
Setting
OSD Language English
Timer
AV2 setting Y,Pb,Pr/RGB, H/V
Power save ON/ OFF
Sound menu
Sound
Volume
Balance
Bass
Treble
Preset Personal / Talk / Music / Normal
Surround OFF / Mid / Max
: Select : Adjust MENU: Back