Sanyo CE52LH1WP instruction manual RS232C Command Tables

RS232C Command Tables

Time Read Command Table

		Status read command						Item
		CR PANELH				Status of accumulated lifetime of panel.
							The same as CR_LAMPH Command
	CR MONH					Status of accumulated lifetime of monitor
							The same as CR_PROJH Command
Sound control Read Command Table
		Status read command						Item
		CR VOLUME				Status of volume value.
		CR MUTE				Status of MUTE.
Setting Read Command Table
		Status read command						Item
CR LANG						Status of Language selection.
CR P-MANE						Status of Power management setting
CR TILE						Status of Tile mode ON/OFF setting
CR TILE-HSETS						Status of Tile mode, the number of Horizontal array.
CR TILE-VSETS						Status of Tile mode, the number of Vertical array.
CR TILE-HLOCAT						Status of Tile mode, the number of Horizontal allocation.
CR TILE-VLOCAT						Status of Tile mode the number of Horizontal allocation.
	CR TILE-BZLHADJ					Status of Tile mode, the width of bezel Horizontal
CR TILE-BZLVADJ						Status of Tile mode, the width of bezel (Vertical)
CR ONPROG						Status of On Program information/
CR WINTERMODE						Status of Winter mode Information.
	CR PANELPROTECT					Statuses of Panel protect Information.
	CR LEDLIGHT					Status of LED light Information.
	CR AVAUTOSHUT					Status of AV auto shut OFF Information.
CR CHILDLOCK						Statuses of Child lock Information.
CR RCINHIBITION						Status of RC Inhibit Information.
Other Read Command Table
		Status read command						Item
CR STATUS						Status of the operation of the monitor.
CR SIGNAL						Status of with or without signal.
CR FREEZE						Status of Freeze setting.
CR FANLOCK						Statuses of fun lock error.
CR TEMP						Status of current temperature value.
UK5 Read Command Table (Basic Command)
		Command	Item					Note
		CR0	Power					On, Standby, power error,
		CR1	Input Mode					AV1, AV2, ..., DVI, PC
		CR WIDE	Wide mode					Auto, Normal, Full, …
CR PICTURE			Picture mode					Dynamic, Standard, …
	CR SIGNAL		Signal existence					Signal / No signal
		CR CHILD	Child lock					On / Off
		CR PSAVE	Power save					On / Off
		CRTM	Panel usage time
		CR RMC	RC inhibition					On / Off
		CR MDL	Model number					52LH1
Error code Table
		Error code
				Receiving the data that cannot be decoded
				The wrong indication of parameter
					Wrong figured number, or wrong word is included.
				Normal receiving				no error
				If the command of out of range is directly entered
				valuable parameter.
				No matching with Hardware
				(Command for optional function which is not equipped.)
				If the command of “Out of range” is entered by
				inclement or decrements by numeric value.
				While capturing the picture, no execution. Wait and
				transmit command again.
				While PIN code is in operation, no execution.
				Wait and transmit command again.
				The errors not including above.

Downloaded From TV-Manual.com Manuals

43