7
1. The LCD display has a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
To turn the monitor into standby mode, press the 44button.
The blue power indicator illuminates more brightly
.
To turn the monitor ON from standby mode, press the 44
button again.
2. Control buttons (bottom corner of back cover)
Menu button: Used to display or cancel main menu.
Input/ dbutton: Switch between AV1, RGB, AV2, AV3, PC , DVI
or Network mode. It is also used to provide sub menu selection from
the Main Menu.
1or 2buttons: provide up and down adjustments.
4button: To switch to standby mode (to switch off completely
disconnect the monitor from the power supply).
Many of your monitors functions are controlled through the menu
function, using the remote control.
During menu operation the bottom of the on screen display will show
which controls can be used for menu navigation.
Press the MENU button to enterthe main menu. Whenever main
menu is accessed initially, PICTUREwill be the default selection.
Asub menu is selected using the
5or 6
button and pressing
the 1or 2button when the required sub menu is highlighted.
When you have finished you can press the BACKbutton to return to
the previous menu, press the MENUbutton to exit the menu
operation.
1. Press the MENU button. PICTURE will be the default selection.
Press the 1or 2button to enter.
Set the picture settings for your “personal”preference.
2. Use the
5or 6
buttonto select eg. Brightness and the 1
or 2button to adjust levels.
White Tone
May be used to adjust the color tone of the picture.Use the
5or
6
buttonto select White Tone and press the 1or 2but-
ton to enter the sub menu. You can select Personal, Cool,
Standardor Warmsettings by using the 1or 2button. To
adjust the color tone of the picture by using the
5or 6
buttonto
select Red(R), Green(G) or Blue(B) and the 1or 2button
to adjust levels. These settings will be stored in personal mode
automatically.
Controls and Menus
INST
INSTALLA
ALLATION
TION
2
1
GB GB
Picture menu
MENU
Picture Brightness
Contrast
Color
Tint (only if NTSC equipment is detected)
Sharpness
White Tone White Tone / R / G / B
Advanced Setting DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode
Sound Treble
Bass
Balance
Bass Expander On / Off
Time
Setup
PC Adj.
Current Time
Schedule
Weekday
On Program AV1 / RGB / AV2 / AV3 / PC / DVI
Menu Setup
PIP / POP Setup
Initial Settings
Text Language
Tile Mode
AV2 Setting
Western / Eastern / Russian / Arabic / Farsi
Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment
RGBHV / YPbPr
Auto Adjust
H-Position
V-Position
Clock
Phase
Language / H/V-Position / Duration / Transparence
PIP/POP Mode / Main/Sub Source / PIP Position
Time
Action
Active
Power On / Power Off
On / Off
1 - 20
Current Weekday
Native Resolution
PC Power save
XGA / WXGA 1366x768
On / Off
Menu Operation
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
60
Downloaded From TV-Manual.com Manuals