Sanyo CLT-U12, CLT-U20, CLT-U22, CLT-U30, CLT-U32 CHANGING THE BATTERY, POWER FAILURE, RECYCLING NICKEL-CADMIUM BATTERIES

22

CHANGING THE BATTERY

• Do not remove the battery from the handset to charge it.

• Never throw the battery into a fire, disassemble it, or heat it.

• Do not remove or damage the battery casing.

• Remove battery if storing the phone for over 30 days.

Make sure the telephone is off before you replace the battery.

1. Slide off the battery compartment cover.

2. Disconnect the battery plug from the jack in the compartment and remove the

battery pack.

3. Insert the new battery pack and connect the cord into the jack.

Note: Please refer to the pictures on page 6, “Battery setup” for guide.

4. Put the battery compartment cover back on.

5. Place handset on the base to charge for 12 hours.

Note: If the handset battery is removed for more than 5 minutes, the directory

memory and caller ID memory will be erased.

Charge the handset battery for 12 continuous hours prior to first use. The initial

battery charge is important for best performance.

Caution: To reduce the risk of fire or personal injury, use a 3.6 V , 600mAh

battery.

Replacement part number: GES-PCF03.

NICKEL-CADMIUM BATTERIES MUST BE DISPOSED OF

PROPERLY.

Please take your used battery pack to a store that recycles

Ni-Cd batteries.

RECYCLING NICKEL-CADMIUM BATTERIES

When power is off, you will not be able to make or receive calls with the

telephone.

After a power outage, place the handset in the base for about 20 seconds

to reset the digital security code.

POWER FAILURE

Contents

Main TABLE OF CONTENTS Handset --------------------------------------------------------------------------- 9 Page INTRODUCTION Main Features 2.4 GHz Technology COMPANDER PLUS Noise Reduction Other features Modular jack Checking package contents Make sure your package includes the items shown here. Installation tips Battery setup Connecting the base unit and charging the handset Connecting the charger and charging the handset (For CLT-U12, CLT-U22 , CLT-U32) Tone/pulse setting Telephone line connection Mounting on a wall To register the second handset (For CLT-U12, CLT-U22 & CL T -U32) Register handsets to the main base before use Handset NAMES AND CONTROLS Page INITIAL PROGRAMMING Language setting Area code setting Ringer tone Tone/pulse setting INITIAL PROGRAMMING Receiving a call Making a call Telephone Number Channel No. Call Timer Volume Level Volume adjustment Transfer a call (CLT-U12, CLT-U22, and CLT-U32 only) Page * TONE key Handset locator (Paging function) MUTE key Low battery warning Caller ID with Call Waiting Voice mail indicator Caller ID list Reviewing Caller ID list Format Caller ID numbers Storing Caller ID entries in the directory Dialing a Caller ID number 4. Press TALK. The number dials automatically. Deleting entries from the Caller list Deleting the displayed entry Deleting all entries Store a number in the directory Replacing a directory entry with a Caller ID entry Changing a stored number Making calls from the directory Reviewing and deleting directory contents Chain dialing from the directory CHANGING THE BATTERY Battery replacement and handling CHANGING THE BATTERY Make sure the telephone is off before you replace the battery. POWER FAILURE RECYCLING NICKEL-CADMIUM BATTERIES HEADSET JACK AND BELT CLIP Headset connection CHARGE/IN USE LED on the base Belt clip installation LIGHT SIGNALS LCD SCREEN MESSAGES The following indicators show the status of a message or of the phone. SOUND SIGNALS CALLER ID TELEPHONE Page MAINTENANCE MAXIMIZE BATTERY PERFORMANCE REN Number: CAUTION 1. NOISE 2. RANGE 3. INTERFERENCE TECHNICAL INFORMATION NOTICE: CAUTION SANYO COMFORT WARRANTY WARRANTY APPLICATION SANYO CANADA INC.S RESPONSIBILITY WHAT IS NOT COVERED SANYO COMFORT WARRANTY ORIGINAL RETAIL PURCHASERS RESPONSIBILITY WARRANTY BECOMES VOID LIMITATIONS STATUTORY WARRANTIES 1-800-263-2244 SOS HELP LINE between 8:30 am 7:00 pm EST STAY-A T-HOME CON VENIENCE HASSLE-FREE EXCHANGE