3.8Installing Patch Ends
①Gasket
② M8 Bolts
③ Side Cover
④ Suction Lamp Cover Joint
CVW-EXA284/224
1.Apply gasket to case body (per previous instructions).
2.If present, remove protective film from inside wall of Patch End.
3.Place Patch End to line up with bolt holes.
4.From inside unit ratchet in M8 & optional M5 bolt into Patch End until secure.
5.Apply Silicone sealant between inside of Patch End and lower frame (see drawing to the left for details).
6.Attach side cover (item 3 in above drawing)
⑤M5 Bolts
CVW-EXA184/124
Apply silicone sealant inside after installing the patch end.
13
