Sanyo DC-MX30 Compact Disc Operation, Notes when operating the CD disc, Loading Compact Disc

Models: DC-MX30

1 17
Download 17 pages 15.74 Kb
Page 9
Image 9
COMPACT DISC OPERATION

COMPACT DISC OPERATION

Notes when operating the CD disc

zOnly press the CD Door Open button to open the CD door.

zTo remove the disc, hold it by the edges and remove from the holder.

Loading Compact Disc

1.Slide the FUNCTION selector to CD position.

2.Press the OPEN button to open the CD door.

3.Place the disc into the tray with label side uppermost and push down to close the CD door. The CD player will automatically scan the disc. The total number of tracks will show in the display. For example, if the disc contains 17 tracks. The display will show as the figure on the right.

4.If there is no disc in the unit, the display will show “ NO”(refer to the figure on the right).

Normal Playback

After loading a CD, press the Notes when operating the CD disc PLAY/PAUSE button on the main unit or on the remote control to start playback. The track number will indicate in the display.

Pause control

To pause temporarily during CD playback, press the Loading Compact Disc PLAY/PAUSE button on the main unit or

on the remote control. The disc playback will pause. Press the Normal Playback PLAY/PAUSE button again to resume playback.

Skip track

During playback, press the Pause control or Skip track buttons on the main unit or press PLAY MODE CONTROL F.F. or. Repeat a track F.R Buttons on the remote control to skip to the previous or next tracks.

PLAY MODE CONTROL

There are three play modes. Press the PLAY MODE button once to active RPT mode, press the PLAY MODE button twice to active RPT ALL mode, Press the PLAY MODE button third time to active RDM mode, press the PLAY MODE button the fourth time to resume the normal playback.

Repeat a track

Select the track to be repeated and begin playback. Press the PLAY MODE button once. The RPT indicator will show in the display and the selected track will be repeated continuously.

Repeat ALL

Press the PLAY MODE twice. The RPT ALL indicator will show in the display and all the tracks on the disc will be repeated continuously.

Random playback

The random playback feature allows you play all the tracks on the current disc in a random order. This function can be selected when the disc is playing or when in a stop mode. Press the PLAY MODE button third times to random play mode. The RDM indicator is shown in the display.

8

Page 9
Image 9
Sanyo DC-MX30 Compact Disc Operation, Notes when operating the CD disc, Loading Compact Disc, Normal Playback, Skip track