REMOTE CONTROL OPERATION

POWER Key—Turns your HDTV On or Off.

ECO Key—Modifies the Energy Saver level (see page 11.)

AUDIO Key—Selects the desired Audio mode. Stereo, Mono, or SAP (when available.)

ON TIMER Key—Displays the current switch on time (see Clock Timer on page 12.)

CAPTION Key—Cycles through the available Caption modes.

RESET Key—Pressing it twice restores your HDTV to its factory settings. All user customized settings will be cleared.

SLEEP Key—Displays the “Off” Timer. While Off Timer is on-screen, press the “0” key to Set the amount of time (in 30 minute increments) at which the HDTV will turn off.

PICTURE Key—Cycle through the picture modes.

SOUND Key—Cycle through the sound modes.

NUMERICAL Keys—Select channels directly.

NOTE: For channels 100 and up, press and hold the first number, then enter the remaining two numbers.

(sub ch) key Allows for the direct selection of digital chanels and subchannels. For exam- ple: to select channel 39.1 press the 3 and 9 keys followed by the dash , and 1 keys.

INPUT Key—Selects the video source to view. Holding down the key displays the Input List.

Volume + – keys—Increases or decreases the audio level.

USB Key—Selects the USB input directly.

PIX SHAPE Key—Cycles through the available aspect ratios. The different settings either stretch, zoom, or fill the image on your screen. Bars may appear on top and bottom of your screen (or on left and right sides) depending on the broadcasted signal or program.

NOTE: Pix6-7 are setup as Pix1-2 in PC mode. Use of Pix6-7 in TV mode is not recommended.

MENU—Displays or hides the on-screen menu.

HELP—Displays on-screen Help menu.

INFO Key—Displays the Channel Information banner.

EXIT Key—Exits the on-screen menu.

Cursor (UP) (DOWN) keys—Move the on- screen cursor up and down.

Cursor ￿ (LEFT) ￿ (RIGHT) keys—Move the on- screen cursor left and right.

ENTER Key—Set or select the highlighted option on the screen.

The PLAY, PAUSE, STOP, REW, FF, W, T, CAMERA, and XACTI MENU keys control playback features on a Sanyo Xacti digital camera when the HDMI- CEC feature has been activated on both the HDTV and the Xacti camera (see HDMI Linking feature on page 12.)

NOTE: These playback keys may or may not react with other devices other than the Xacti camera.

Channel ▲ ▼ keys—Scan through the channels in the memory database.

MUTE Key—Mute or restore the sound.

RECALL Key—Switch between current channel and last selected channel.

DYN VOL Key—Modifies the Dyanmic Volume feature settings.

Need help? www.sanyoctv.com 1-800-877-50329

Page 9
Image 9
Sanyo DP46840, DP42840 manual Remote Control Operation