RECORDING SETTING
Relationship between RECORDING AREA SET andOVERWRITE
| <RECORDING AREA SET> |
|
|
| <RECORDING CONDITIONS | SET> | |||||
TOTAL CAPACITY | : | 80GB | DIGITAL SERIES RECORDING | : | OFF | ||||||
NORMAL RECORDING AREA | : | 80 | % | TOTAL NUMBER | : | 1 |
| ||||
| AREA FULL RESET | : | 19 | % |
|
|
|
|
| ||
| ALARM RECORDING AREA |
| NORMAL RECORDING AREA |
|
|
| |||||
| AREA FULL RESET | : | 1 | % |
|
|
| ||||
| ARCHIVE AREA |
|
| OVERWRITE | : | OFF |
| ||||
| AREA FULL RESET |
|
|
| ALARM RECORDING AREA |
|
|
| |||
CAUTION : WHEN THE AREA SETTING IS CHANGED, |
| OVERWRITE | : | OFF |
| ||||||
REMAINING DISK WARNING | : | 1 % | |||||||||
| THE WHOLE AREA WILL BE INITIALIZED ! |
4 Use the jog dial to change select the image quality (example:
“SUPER FINE” ), and then turn the shuttle dial clockwise. The cursor moves to AUDIO RECORDING.
| <NORMAL REC MODE SET> | ||||
PICTURE QUALITY | : SUPER FINE | ||||
AUDIO RECORDING | : ON | 57H) | |||
REC | RATE | : | 10FPS | ( | |
REC | PROGRAM GROUP | : | OFF |
If the normal recording area and alarm recording area become full, select AREA FULL RESET for the normal recording area or alarm recording area in the RECORDING AREA SET menu. (See page 52.)
5 Turn the shuttle dial clockwise, use the jog dial to set audio recording (example: “ ON” ), and then turn the shuttle dial.
The cursor moves to REC RATE.
Note: No audio input is provided from the digital video input terminals.Note: | |||
Audio signals can be input as analog signals via the audio input | • Αυδιο ρεχορδινγ χαν βε σετ ωηεν τηε ΡΕΧ ΡΑΤΕ σεττι | ||
terminals (such as the MIC terminal). For details on |
| 10ΦΠΣ το 60ΦΠΣ. | |
CONNECTIONS, see page 8. |
| ||
| • Ωηεν σετ“ON”,το the letter “A” (audio recording indicator) | ||
|
| ||
|
| appears in front of the REC RATE recording rate. This is because | |
C NORMAL REC MODE SET menu |
| the audio recordings are also made in the normal recording area, | |
| so that the image recording capacity of the normal recording area | ||
This describe how to make the settings for image quality, audio |
| is reduced. | |
6 Turn the shuttle dial clockwise, use the jog dial to set the | |||
recording and recording speed for images recorded in the normal | |||
recording area. In addition, you can also specify program numbers | |||
that have been set in REC PROGRAM GROUP. |
| recording speed (example: “ 0.1” ), and then turn the shuttle | |
|
| dial. |
The cursor moves to REC PROGRAM GROUP.
MENU |
| <NORMAL REC MODE SET> | |||
| PICTURE QUALITY | : ENHANCED | |||
| AUDIO RECORDING | : OFF | |||
| REC | RATE | : | 30FPS | ( 18H) |
| REC | PROGRAM GROUP | : | OFF |
1 Press the MENU button to select RECORD SET, and then turn the shuttle dial clockwise.
The RECORD SET
RECORDING AREA SET.
Note: The field and frame recording speeds vary depending on the PICTURE QUALITY setting. Refer to the Recording speed table for details. (See page 12.)
7 Turn the shuttle dial clockwise, use the jog dial to set the program number (example:
The cursor moves to PICTURE QUALITY.
<NORMAL REC MODE SET>
PICTURE QUALITY |
| : | SUPER FINE | ||
AUDIO RECORDING |
| : | ON | ||
REC | RATE | : | A***FPS | ( 67H) | |
REC | PROGRAM GROUP | : |
2 Use the jog dial to move the cursor to NORMAL REC MODE SET, and then turn the shuttle dial clockwise.
The NORMAL REC MODE SET
3 Turn the shuttle dial clockwise.
“ENHANCED” flashes.
Display examples: Picture quality selection
•ΒΑΣΙΧ (ΒΘ):(15 ΚΒ)
•ΝΟΡΜΑΛ (ΝΘ):(22 ΚΒ)
•ΕΝΗΑΝΧΕΔ (ΕΝ):(30 ΚΒ)
•ΦΙΝΕ (ΦΙ):(42 ΚΒ)
•ΣΥΠΕΡ ΦΙΝΕ (ΣΦ):(56 ΚΒ)
Display examples:
•ΟΦΦ:Ι∝αγεσ φρο∝ αλλ χα∝ερασ αρε ρεχορδεδ.
•Π−1:Ωηεν προγρα∝ νο. 1 ισ ρεχορδεδ.
•Π−2:Ωηεν προγρα∝ νο. 2 ισ ρεχορδεδ.
•Π−3:Ωηεν προγρα∝ νο. 3 ισ ρεχορδεδ.
•Π−4:Ωηεν προγρα∝ νο. 4 ισ ρεχορδεδ.
Νοτε:Ωηεν σπεχιφψινγ α προγρα∝ νυ∝βερ, χαρρψ ουτ τηε
“PROGRAM REC SET menu ”. (See page 55.)
8 Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT%OSD
X?English